Some electrical problems will not wait. A burning smell near an outlet, a panel that keeps tripping the same breaker, or wiring that took water during a storm are the kinds of calls that need to move quickly. Others, a lighting upgrade, a dedicated circuit for a new appliance, or a panel inspection before a renovation, can be planned around your schedule. We take both kinds of calls, and we handle them the same way: scope the job on the phone, confirm the price before anything is booked, and show up ready to work.
Reserve is a town where the housing stock runs older in places, and the electrical systems inside those homes often reflect that. Knob-and-tube wiring, aluminum branch circuits, and panels that were sized for a different era of demand are all common findings. We work on all of it, and we work on newer construction too. Being local means we're easy to reach and easy to work with.
Call (225) 592-3956 for a quote, and we will tell you what the job involves before you commit to anything.
A fault that poses a real risk gets treated that way. If you are dealing with sparking at a receptacle, a panel that is warm to the touch, or wiring that smells like it is burning, call us and describe what you are seeing. We will tell you on the phone how urgent it is and what steps to take while you wait. We are available every day from 5:30 AM to 9:00 PM, and urgent calls get priority.
Not every job is an emergency, and most are not. A ceiling fan installation, a GFCI upgrade in a bathroom, or a new circuit for a workshop can be scheduled at a time that works for you. If you are a landlord managing a rental in Reserve, or a business that needs to stay open during the work, we can talk through what the visit involves and how long the panel or the affected circuits will need to be off. That conversation happens on the call, before anything is put on the calendar.
One call gets the problem looked at properly.
Renovations and additions move fast when the schedule holds, and they stall when one trade is not ready for the next. The electrician belongs in the walls before the drywall goes up, and at the panel before the inspector signs off. Getting that sequence right is not complicated, but it has to be planned.
We work alongside contractors, builders, and property owners on projects where the electrical rough-in needs to happen at a specific point in the build. That means running new circuits before the walls close, placing outlet and switch boxes where the finish carpenter needs them, and making sure the panel has the capacity the finished space will actually draw. If a renovation is adding square footage, a new kitchen, or a home office with its own circuit load, we talk through the panel capacity question on the call.
The same applies to commercial and rental build-outs. A tenant improvement that adds lighting, data drops, and dedicated equipment circuits needs the electrical work coordinated with the general contractor's schedule, not retrofitted after the walls are finished. We handle that coordination on the phone before the work starts.
Dead outlets usually have a simple cause worth finding.
Ground-fault and arc-fault protection are required in specific locations, and older homes in Reserve often lack both. GFCI outlets protect against shock in wet areas: kitchens, bathrooms, garages, and outdoor receptacles. AFCI protection addresses arc faults in bedroom and living area circuits, which is where electrical fires most often start. If your home was built or wired before these requirements were standard, we assess what is in place and explain what an upgrade involves.
Recessed lighting and LED retrofits are among the most common interior electrical requests we handle. The fixture swap itself is straightforward when the existing wiring supports it. When it does not, running a new circuit or adding a junction box is part of the job, and we scope that on the call so you know what the visit covers before we arrive.
A safety inspection covers the panel, the branch circuits, the grounding system, and the receptacles throughout the property. For older homes in St. John the Baptist Parish, it often surfaces aluminum wiring connections that have loosened over time, or circuits that were added without documentation. We walk through what we find and what it means before any repair is recommended.
Low-voltage work, data cabling, doorbell wiring, and structured wiring rough-in all belong on the electrical side of a renovation or new build. We handle the rough-in so the finish work has clean, properly placed termination points. If a smart doorbell or a home network upgrade is on the list, we confirm what the existing wiring can support before anything is ordered.
A panel where half the breakers are unlabeled or mislabeled is a real problem when something goes wrong. We trace and label circuits properly, which matters most in older homes where additions were wired over time without documentation. It is also useful for landlords managing rental properties where a tenant needs to know which breaker controls which room.
A refrigerator, electric range, dryer, or dishwasher pulling power from a shared circuit creates load imbalance and, over time, a fault risk. We run dedicated circuits for major appliances and confirm the panel has the capacity to carry the added breaker before the circuit is installed. If the panel is already near its limit, we talk through what a service upgrade involves. The wider scope of the work is on our services page for electrical work.
What sets this service apart is straightforward: the price is confirmed before the work is scheduled, and what it covers is explained on the call. You are not agreeing to an unknown number when you book a visit.
What moves a quote is the actual scope of the job. The fault location matters. Whether reaching it requires opening a wall, pulling a circuit back to the panel, or replacing a fixture box changes what the visit involves. Whether the existing panel can carry a new circuit, or whether it needs work before the circuit goes in, is another factor. We work through those questions on the phone so the price reflects what the job actually is, not a best guess.
No-pressure estimates, priced up front.
Call (225) 592-3956, describe what you are dealing with, and we will tell you what it involves and what it costs before anything is put on the schedule.
We find work done by others on a regular basis, and most of it falls into one of two categories. Some of it is older wiring that was correct when it was installed and now needs updating: aluminum branch circuits that need proper connectors at every termination point, knob-and-tube that was never designed to carry a modern electrical load, or a panel that was adequate for the home as built but not for what the home has become. That work gets assessed, documented, and corrected.
Some of it is work that was not done correctly to begin with. Overloaded circuits, missing ground wires, outlets wired without a neutral, or junction boxes buried inside a wall without an accessible cover are all things we find. When we do, we explain what we found, what the code requires, and what correcting it involves before we proceed. We do not make a drama of it. We tell you what is there and what it takes to fix it.
Wiring work checked against code before sign-off is how every job gets closed out, whether it is a repair, an upgrade, or a correction to someone else's work.
Reserve is the focus of this page, but our coverage does not stop at the town line. We serve the communities around it, including:
If your property is elsewhere in St. John the Baptist Parish or a neighboring area, call and we will confirm service availability for your address. The scope and the price are confirmed before we schedule regardless of where the job is located.
Work on the meter base and service entrance involves coordination with the utility, because the utility owns the lines up to and including the meter. We handle the property side of that work and communicate with the utility about what needs to happen on their end, including any required disconnect.
Permit requirements depend on the scope of the work and whether it involves the panel, new circuits, or changes to the service entrance. Where a permit applies, that process is part of how the work gets done and the inspection gets closed out. Ask on the call and we will confirm what applies to your specific job before anything is scheduled.
We test at the meter and at the panel to determine where the power loss begins. If the problem is on the property side, we trace from the panel outward. If the supply side is involved, the utility needs to be contacted, and we advise you on what to tell them.
Yes. We can talk through what the visit involves and how long any circuits or the panel will need to be off before we schedule. If the tenant needs to be notified or if access needs to be coordinated, mention that on the call and we will work around it. The scope and the logistics are settled before we arrive, not after.
Homes built several decades ago in this area often have aluminum branch-circuit wiring, panels that were sized for a smaller load than the home now carries, and outlets that lack GFCI protection in wet locations. Knob-and-tube wiring turns up in the oldest structures. None of these are unusual findings, and all of them can be assessed and addressed. Call and describe what you are seeing and we will tell you what the job involves.
Not necessarily, but we need to be able to move through the attic safely to run wiring or access junction boxes. If the attic is heavily stored and the access path is blocked, clearing a path to the work area makes the job faster and reduces the risk of something being damaged in the process.
If you have an electrical problem in Reserve, the fastest way to get it looked at is a phone call. We scope the job on the call, give you the price before anything is booked, and schedule the visit from there. No guesswork. No shortcuts. No loose ends.
Residential wiring. Commercial wiring. One number for both.
Call (225) 592-3956.
There are no forms to fill out and no waiting for a callback.
We take electrical work in these nearby communities as well: Laplace, Gramercy, Lutcher, Ponchatoula.
We handle the full range of residential and commercial electrical work in Reserve and across St. John the Baptist Parish, from a single dead outlet to a complete service upgrade. The table below covers what each service includes, who it fits, and what is worth knowing before you call. Every job is scoped on the phone so you have the price and the plan before anything is scheduled.
| Type of Work | What the Job Involves | When You Need It | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 200-amp service upgradesFuse box replacementLoad calculation and circuit distributionSubpanel installation | Homes adding EV chargers, major appliances, or square footage that the original panel cannot carry | A panel upgrade involves a load calculation, not just swapping a box. We walk through what the job covers on the call before anything is scheduled. |
| Lighting Installation | Recessed and LED retrofit lightingUnder-cabinet and landscape circuitsSecurity and motion sensor lightsIndoor layout upgrades | Homeowners updating fixtures or adding lighting where the existing layout does not match how the space is used | LED retrofits reduce heat output meaningfully, which matters in a climate where cooling loads are already high for most of the year. |
| Ceiling Fan Installation | Fan and switch wiringNew circuit runs where no wiring existsSwitch leg addition | Rooms with no existing ceiling wiring or homeowners replacing a fixture with a fan for the first time | A room with no existing wiring requires a new circuit run and a switch leg, not just a fixture swap. We scope that on the call. |
Call us at (225) 592-3956 to talk through what your property needs and get the job scoped before anything is booked.
(225) 592-3956